Move Up Your MARK V 505 to The MARK 7 Pro Fence and Table System and Do Everything the Professional Do!
$859.99
-
This Pro Fence System has been engineered to give you even better control, precision and quality performance than you’ve come to expect from your MARK V 510. The professional-duty Self-Aligning, Pro Fence System features two interchangeable stainless steel scales for direct-reading of rip cut widths, plus twin locking levers, first one for the infeed end of the fence and the second for the outfeed end to ensure a positive, precise fence lock-down, even when working with large and/or heavy workpieces. Your new Rip Fence drops straight down onto the fence rails without tipping or fiddling, then slides easily and precisely along the rails on high-tech glides.
- Larger Rip Fence is 24-1/2″ Long x 2-1/2″ Thick with Four T-Slot Tracks.
- (2) New Direct-Reading, Magnetic, Stainless Steel Rip Fence Scales, one 45″ long and one 16″ long
- 2-1/2” Wide Fence Straddler
- (2) New Rails for Main Worktable with Magnetic Strips
- (2) New Rails for Extension Table with Magnetic Strips
- (2) New, Fully Assembled and Aligned Floating Extension Tables
- Four 27″ Connecting Tubes
- Two Telescoping Legs
- All Required Fittings and Hardware
- Instruction Manual
- (2) Special Set-Up and Alignment Gauges
The Can't Miss Details
The Pro Fence System Upgrade gives you everything you need to step your Mark V Model 505 up to the super-versatile complete workpiece Table Support System and Enhanced Rip Fence of the MARK 7 Pro Fence & Table System.
The professional-duty self-aligning, Pro Fence System features two interchangeable stainless-steel scales for direct-reading of rip cut widths, plus twin locking levers, first one for the infeed end of the fence and the second for the outfeed end to ensure a positive, precise fence lock-down, even when working with large and/or heavy workpieces. Your new Rip Fence drops straight down onto the fence rails without tipping or fiddling, then slides easily and precisely along the rails on high-tech glides.
Plus - the fence is easier to square-up than a 505 fence (the alignment screws are easily accessible on the top of the Rip Fence) and the additionally the two new new floating tables and two new Fixed Extension table Rails feature a 3-point locking system to ensure that your fence is always parallel to the blade, unlike the single-point locking system on the Model 505 fixed Extension table.
Add to everything above, TWO Complete Floating Extension Tables with Four 27" Connecting Tubes and two Telescoping Support Legs with Adjustable Fittings. These allow you to slide these Floating Tables anywhere between the Main Worktable and Fixed Extension Table OR EVEN outboard of either of these Tables.
Here's What You Will Get with the Pro Fence & Table Upgrade Kit:
• Larger Rip Fence is 24-1/2" Long x 2-1/2" Thick With Four T-Slot Tracks. Two on the Top Surface and a T-Slot Track on Each Side Face
• (2) New Direct-Reading Rip Fence Scales - Two Magnetic, Stainless Steel Scales, one 45" long and one 16" long
• New, Wider Fence Straddler made to Fit the New Wider Rip Fence
• (2) New Rails for Main Worktable with Magnetic Strips for the Stainless Steel Scales
• (2) New Rails for Extension Table with Magnetic Strips for the Stainless Steel Scales
• (2) New, Fully Assembled and Aligned Floating Extension Tables that Slide on Connecting Tubes and Lock Anywhere You Want Them
• Four 27" Connecting Tubes Slip Through the Rails and Tie the System Together With Locking Knobs
• Two Telescoping Legs Give Added Support - a Quick Twist Locks Their Height
• All Required Fittings and Hardware
• Instruction Manual
• (2) Special Set-Up and Alignment Gauges
Increase Your MARK s Outboard Support When Ripping Large Panels Or Cross-Cutting Long Boards by Adding 5-Foot Connector Tubes
Just slip these extra-long tubes into the rails of your MARK ’s (for All MARKs except MARK V 500 unless Upgraded) main table or extension table to get all the added support you need for sawing, drilling, sanding, shaping or performing virtually any operation with extra large or long workpieces. Your existing telescoping legs and floating extension tables also work with these tubes.
Note: Not compatible with Model 500 Mark Vs unless it has been Upgraded.
Part Number | Name | Specifications |
---|---|---|
555986 | MARK V 505 to MARK 7 Pro Table System Upgrade | • Larger Rip Fence is 24-1/2" Long x 2-1/2" Thick with Four T-Slot Tracks. • (2) New Direct-Reading, Magnetic, Stainless Steel Rip Fence Scales, one 45" long and one 16" long • 2-1/2” Wide Fence Straddler • (2) New Rails for Main Worktable with Magnetic Strips • (2) New Rails for Extension Table with Magnetic Strips • (2) New, Fully Assembled and Aligned Floating Extension Tables • Four 27" Connecting Tubes • Two Telescoping Legs • All Required Fittings and Hardware • Instruction Manual • (2) Special Set-Up and Alignment Gauges |
Only logged in customers who have purchased this product may leave a review.
Shopsmith Owner Testimonials
My MARK 7 is not only a space saver — it's a life saver, time saver, and money saver.
- Kent Bradshaw, Owner Since 1974
Let Us Build You a Shopsmith Today
With more than 600,000+ Owners, Shopsmith is the #1 Multi-Purpose Woodworking Equipment provider in the Unites States. We offer one of the best warranties in the business, plus, our Customer Care team takes great pride in supporting our Owners. We believe Owners should be able to connect with a live person, not a machine.
Email Customer Care at info@shopsmith.com.
$859.99Add to cart
Reviews
There are no reviews yet.